3. SNMP
53
3.4
MIB
This section describes the MIB (Management Information Base) that the LV 5800 uses.
The indications in the ACCESS column in the tables are defined as follows:
R/O
Information that can be retrieved using the SNMP manager.
R/W
Information that can be retrieved and set using the SNMP manager.
R/WO
Information that can be retrieved and set using the SNMP manager.
However, the retrieved data is a fixed value with no meaning.
3.4.1
Standard MIB
The LV 5800 uses the standard MIB listed below.
・
RFC1213 (MIB-
Ⅱ
)
・
RFC1354 (IP Forwarding Table MIB)
Note that this version does not support some objects (those marked as “No” under the S
column).
The indications in the SUPPORT column in the tables are defined as follows:
○
Supported as defined by the standard.
△
Only read is supported by the LV 5800 even though read and write are possible
according to the standard.
×
Not
supported.
