59
10. STATUS DISPLAY
F•1
F•4
10.2
SDI Section Display (LV 5838 only)
10.2.1
SDI Section Display Description
The SDI section display shows the status of SDI signals. The channel that is displayed is
the channel that is currently selected.
Under
“SDI,” the presence or absence of SDI signals, format, and embedded channels are
displayed.
Under
“EMBEDDED AUDIO, “ the error counts for the items whose detection has been
enabled on the SDI ERROR tab in the system settings are displayed. Errors are counted
up to 999,999. You
can clear the counters using F•4 ERROR CLEAR.
[Reference] AUDIO ERROR tab → See 5.8, “Configuring Error Detection Settings.”
Figure 10-7 SDI section display
10.2.2
Configuring the SDI Section Display Settings
To
configure the SDI section display settings, use F•2 STATUS SETUP on the mode menu
and the SDI ERROR tab in the system settings. This section explains the status menu. For
details on the SDI ERROR tab, see section 5.10,
“Configuring SDI Error Detection Settings
(LV 5838
only).”
→
DISPLAY to STATUS
→
STATUS SETUP
→
DISPLAY MODE to SDI-SEC
→
Figure 10-8 STATUS SETUP menu
●
ERROR CLEAR
Press this key to reset the error counters to zero.
F•2
F
•1
MODE
USO
RESTRITO
