3
2. SPECIFICATIONS
*1
The LV 58SER04 cannot descramble scrambled broadcasts, and it may not be able to decode all
MPEG-2 formats.
The LV 58SER04 can only decode one stream of audio and video data at a time. You cannot decode
and display different audio and video data streams simultaneously on the multi display using only one
MPEG-2 input unit. If you display the decoded data stream using the multi display and then change the
decoded PID, the PID for every screen will change.
*2
To decode Dolby Digital (AC-3), the LV 58SER40A (DIGITAL AUDIO) must be equipped with the Dolby
E option.
*3
There are some limitations on error detection.
*4
Jitter cannot be measured or displayed.
2.3
Specifications
2.3.1
Standards
Supported Standards
ISO/IEC 13818-1
Profile and Level
MP@HL, MP@ML, 422@ML, 422P@HL
2.3.2
DVB-ASI Input
Input Connector
Input Connector
BNC-R
Number of Input Connectors
1 connector, 75
Ω
Input Return Loss
-20 dB (5 to 270 MHz)
Maximum Input Voltage
Input Signal
±2 V (DC + peak AC)
Serial Clock
270 MHz
Transmission Mode
Packet/Burst
Maximum Bit Rate
66 Mbps
Supported Packet Sizes
188, 204, and 208 bytes
Packet Size Detection
Automatically detects supported packet sizes.
2.3.3
Decoding Capabilities
Video Formats
1920x1080i / 59.94, 60, 50
(4:2:0, 4:2:2)
1440x1080i / 59.94, 60, 50
(4:2:0, 4:2:2)
1280x 720p / 59.94, 60, 50 (4:2:0, 4:2:2)
720x 480i / 59.94
(4:2:0, 4:2:2)
720x 576i / 50
(4:2:0, 4:2:2)
Audio Signals*
MPEG-2 AAC, Dolby Digital (AC-3), LPCM (SMPTE
302M), MPEG-1 Layer 2
*
The LV 58SER40A (DIGITAL AUDIO) is necessary to display and output audio. To decode Dolby
Digital (AC-3), the LV 58SER40A must be equipped with the Dolby E option.
USO
RESTRITO
