16
7 SERVICING OPERATIONS
7.1 Precautions
Beware of hot parts:
• The entire upper part of the tray is hot after use
• Before handling the tray, sprinkle it with water to cool it
• Wear gloves
7.2 Cleaning
•
Before washing operation: Disconnect the remote control cable and position the protective cap
on the connector.
•
In the case of using water nozzle or training water extinguisher: Rinse the tray with water
to get rid of the various residues.
•
In the case of using Co2 extinguisher or foam concentrate: Dry clean with a tissue so as
to remove powder residue or other extinguishing agents (thoroughly stress at the igniter).
Then wash the tray with water.
•
In the two previous cases, and to remove soot, clean the tray with an Inox special detergent
"Pyroclean" type; Apply with a damp sponge, then rinse with water and dry with a soft tissue.
•
Dry the sensitive parts such as the electrical connector and fittings of the tank and gas supply
hose. Also check the holes so they do not have sand or gravel. They would damage the valve.
7.3 Charging the battery
Plug the charger into the connector of the tray which is also used to connect the cable of one
of the remotes control.
Then connect the charger to the mains.
Plug here
