Tel: +44 (0)1981 241668
Skyrrid Farm, Pontrilas, Hereford. HR2 0BW. UK
www.leturbines.com
Page 18 of 28
Damage caused by incorrect connection to external electrical equipment, or failure to
observe current regulations concerning connection to external electrical networks,
equipment or any other devices.
If you should experience a problem with your turbine, your first ‘port-of-call’ should be the reseller
or installer from whom you purchased the product. They should be able to resolve the problem
quickly and efficiently. If you are unable to contact the original reseller, then please contact us
directly.
Please quote the serial number of your turbine when dealing with warranty issues. The serial
number can be found on the nameplate positioned on the underside of the chassis.
Disclaimer
All specifications are subject to change without prior notice.
The information given in this user manual is believed to be accurate and reliable. Leading
Edge Turbines assumes no responsibility for omissions or inaccuracies.
The user of this information and product assumes full responsibility and risk.
The LE-v150 turbine is a source of electrical power. It must be installed in accordance with
local building and electrical regulations. Consult your local planning (zoning) office for
details.
The LE-v150 turbine has moving parts that may cause injury due to poor installation and
unsafe operation. Leading Edge Turbines assumes no responsibility for problems caused by
unsafe or unsatisfactory installation or operation.
Designed & Manufactured in the UK by:
Leading Edge Turbines Ltd
Skyrrid Farm,
Pontrilas,
Hereford.
HR2 0BW
Tel: +44 (0)1981 241668
www.leturbines.com
Compliant with
EN BS 61400-2: Safety of Small Wind
Turbines
