Tel: +44 (0)1981 241668
Skyrrid Farm, Pontrilas, Hereford. HR2 0BW. UK
www.leturbines.com
Page 9 of 28
3)
Remove the turbine from the transit packing – Use a pair of 13mm A/F spanner and or
ratchet to remove the M8 fixings from the transit base board.
4)
Fix the turbine in its mounting Position – With the turbine removed from the baseboard, it
can now be fitted in its intended position. The LE-v150 is supplied as standard with three
universal flat mounting brackets. Dimensions of the brackets can be found below. Using
70mm Exhaust clamps, the turbine can be fixed to a 50mm outer diameter pole.
5)
Ensure that the turbine is mounted vertically and on a flat and smooth surface.
Incorrectly mounting the turbine may cause the main spine to distort which may result in
the turbine not rotating freely.