www.leadingtouch.com
12
/
27
2 Change of touchscreen
3 Change of computer or monitor
Enter Touchscreen calibration program through the following programmer
1 Click “Start”----“programmer”----“Leadingtouch”--------“Serial/USB”
2 Click “Calibration”
1.3 Line test
Test the touchscreen.
1 Clear------clear all the lines in the test screen.
2 Exit -------quit test mode.
1.4 Setup of the Touchscreen Paramter
Click “Touchsetup”in Leadingtouch,Working mode of the touchscreen can be modified on
“Settings” lables
