M415B Micro Microstepping Driver Manual V2.0
Tel: +086 0755-26434369 1 Web Site: www.leadshine.com
1. Introduction, Features and Applications
Introduction
The M415B is a very small size high performance microstepping driver based on one of the most
advanced technologies in the world today. It
’
s suitable for driving any 2-phase and 4-phase hybrid
stepping motors. By using advanced bipolar constant-current chopping technique, it can output
more speed and power from the same motor, compared with traditional drivers such as L/R
drivers.
Features
l
High performance, low cost
l
Supply voltage up to +40VDC
l
Output current up to 1.5A
l
Inaudible 20 KHz chopping frequency
l
TTL compatible and optically isolated input
signals
l
Automatic idle-current reduction
l
Mixed-decay current control for less motor
heating
l
7
selectable microstep resolutions: 1, 2, 4, 8,
16, 32, 64
l
Suitable for 2-phase and 4-phase motors
l
Protection against power leads(+, -)reversal
l
Small size: 86*55*20mm
Applications
Suitable for a wide range of stepping motors from NEMA size 14 to 23, which used in various kinds
of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place
devices, and etc. It
’
s specially adapted to the applications desired with low vibration, high speed and
high precision.
2. Specifications
Electrical Specifications
(T
j =
25
℃
)
Parameters
M415B
Supply voltage
+15 to 40 VDC
Typical supply voltage
+24
-
+36 VDC
Output current (Peak)
0.21 to 1.5 A
Microstep resolutions
1, 2, 4, 8, 16, 32, 64.
M415B Micro Microstepping Driver Manual V2.0
Tel: +086 0755-26434369 2 Web Site: www.leadshine.com
Operating Environment and Other Specifications
Cooling
Natural Cooling or forced cooling
Environment
Avoid dust, oil fog and corrosive gases
Ambient Temperature
0
℃
-
50
℃
Humidity
40%RH
-
90%RH
Operating Temperature
70 Max
℃
Operating
Environment
Vibration
5.9m/s
2
Max
Storage Temperature
-20
℃
-
65
℃
Weight
Approx. 150 gram (5.3 oz)
Mechanical Specifications
(unit=mm, 1 inch=25.4 mm)
Figure 1: Mechanical dimensions
*Recommend use side mounting for better heat dissipation
Elimination of Heat
l
Driver
’
s reliable working temperature should be <65 ,
℃
motor working temperature should be
<80 ;
℃
l
Recommend use automatic half-current mode, namely current automatically be reduced to 60%
when motor stops, so as to decrease driver heating and motor heating;
l
Recommend use side mounting to maximize heatsink area.