1
No.
Name
Brief of Function
1
Switch
Turn ON/OFF the PBOX X3 system
2
USB
Charge for external devices
3
Micro USB
Charge for PBOX X3 (PX3S model
without micro USB)
4
Solar Panel
Charge for PBOX X3
5
LED Module
Illuminate
6
M4×15 Screw
Fix LED module
7
Rubber Lid
For waterproof purpose
8
M6×50 Screw
Fix PBOX X3 onto the lamppost
9
M6×30 Screw
Adjust angle of LED module
10
Back Stand
Use jointly with lamp frame
11
Lamp Frame
Prop main body
12
Water-proofSpeaker
(PX3BL only)
Playingmusic
Open the package and take the PBOX X3 out.
Open the Rubber Lid at the bottom and press Power
Switch (switch 1, as shown in the picture on the left). Put
the rubber lid back on after that so the product stays
waterproof. Light should be on if you cover the solar panel
at this time.
M6 expansion bolt (bottom)
Hex screwdriver
M6 expansion bolt (top)
2
.
4
Installation Guide
Type A: Wall-mount the Lamp
Use a 8 drill bit and make two holes on the wall. Put two
Φ
M6 expansion bolts into the holes. Place the lamp on the
wall by fastening the expansion bolts with a hex
screwdriver (as seen in the picture on the left).
Tips: For the best performance of the solar panel, try to fix
the lamp as close to the top of the wall as possible when
installing.
Type B: Stand the Lamp on the Ground
Insert the back stand into the lamp frame to stabilize the
lamp (as shown in the picture on the left).
EN
7
8
4
1
3
2
1
1
1
0
9
8
6
5
7
1
2
