Leadtek GPS LR9553D Bluetooth Data logger & Receiver
©2007 Leadtek Research Inc. All rights reserved.
28
6. If Cold Start doesn’t work, try to set to default, choose factory and click OK, see below.
Step 2
Turn on the power switch, you can choose the mode of navigation and log both or the mode of log
only for more operation time.
Step 3
When the memory is full, the green light will be constantly on and the data logging will be ceased.
You should now download the data to your computer and then the data logging will continue. If the
red light is quickly blinking while logging, which means the power is low, you should immediately
charge for the continuous data logging.