Read and understand the instruction manual.
Fire hazard.
Explosion hazard.
Respiratory hazard.
Electric shock hazard.
IMPORTANT SAFETY INSTRUCTIONS
TECHNICAL DATA
SAFETY GUIDELINES / DEFINITIONS
Current:
3.0A
Flow Rate:
900ml/min
Max. Viscosity:
100DIN-s
(runout time: 100 seconds)
Nozzle Size:
Φ1.5mm
Φ3.5mm
Container Capacity 1200ml
It is important for you to read and understand
this manual. The information it contains relates
to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help
you recognize this information.
DANGER! Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING! Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION! Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE! Used without the safety alert sym-
bol indicates a potentially hazardous situation
which, if not avoided, may result in property
damage.
ENGLISH
The following are explanations of important
safety hazard pictorials in this manual.
SAVE THESE INSTRUCTIONS:
To reduce the risks of fire or explosion, electrical
shock and the injury to persons, read and understand
all instructions included in this manual. Be familiar
with the controls and the proper usage of the
equipment.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD
USE ONLY.
WARNING! FIRE OR EXPLOSION
HAZARD. Solvent and spray material fumes can
explode or ignite. Severe injury or property damage
can occur. To avoid these risks, take the following
preventions:
> Exhaust and fresh air introduction must be provided
to keep the air within the spray area.
> Avoid all ignition sources such as static electricity
sparks, open flames, pilot lights, hot objects, lit tobacco
products, and sparks from connecting and disconnecting
power cords or working light switches.
> Fire extinguisher equipment shall be present and
working.
> Keep area clean and free of paint or solvent
> Follow the material and solvent manufacturer’s
safety precautions and warnings.
> Do not spray flammable or combustible materials
near an open flame or sources of ignition such as lit
tobacco products, motors, and electrical equipment.
