Hub Installation Instructions
page 5
8.
In your Wi-Fi settings, the LeakSmart Hub will appear
within the list of available Wi-Fi networks as
leakSMART– XXXX
Note:
the 4 digit XXXX code is the last four digits of the
MAC address tied to your LeakSmart Hub.
Select leakSMART – XXXX network name to connect
the hub.
Note:
if the leakSMART – XXXX network is not
displayed as one of the Wi-Fi networks, you’ll have to
reset your Hub by hitting the pinhole reset button
located on the back of the hub.
9.
After successful connection with the leakSMART –
XXXX network, switch back to the LeakSmart app.
Setup and Operation
