8
7
5.Install the steering wheel
a.Firstly connect the steering wheel wire to
dashboard wire.
b.Then insert steering wheel into the
dashboard hole position ,align the steering
rod hole with the steering wheel hole, insert
¢5 bolt and tight with nut.
(Referring to Picture5)
two M4*12mm
screws
6. Install the front windshield
a. Install the front windshield into the card
slot of the car body, and then use two
M4*12mm screws to tight it.
(Referring Picture6)
Install the cockpit
front baffle on the
car body,and then
use eight 4*12mm
screws to tight it.
Trunk floor
Install the trunk
floor on the car
body,and then
use four 4*12mm
screws to tight it.
7. Install the cockpit front baffle and trunk floor
a. Install the cockpit front baffle into the
card slot of the car body, and then use
eight 4*12mm screws to tight it.
b. Install the trunk floor into the card slot
of the car body, and then use four 4*12mm
screws to tight it.
(Referring to Picture7)
First insert the guide
base into the car
body,then insert
the guide frame
headlamp into the
guide frame base.
1.Insert the seat into
the seat backrest.
2.Put the seat on the car
body, and then use two
4*12mm screws to tight it.
3.Insert the left and
right rearview mirrors
into the car body.
8.Install the guide frame,seat
and rearview mirror
a.First insert the guide base into
the car body,then insert the
guide frame headlamp into the
guide frame base.
b.Take out the seat and seat
backrest,and place the
assembled seat as shown in
picture, and tight with two
M4 * 12 screws.
c.Insert the left and right
rearview mirrors into the
car body.
(Referring to Picture8)
Cockpit front baffle
