10. Functions of Remote:
1
1
1
、
无刷马达
2
、
差速器
3
、手刹调节线
4
、刹车器
5
、刹车盘
Note
：
Use screwdriver to get screws off and
open ba
ttery box
，
install 2 pc AAA 1.5V battery
in, and fix it with screws.
The car is with remote priority function: while it is controlled by remote,
the step switch does not work; Disconnect the remote , the step switch
works then.
Remote:
Open the battery holder and put in 2 pcs AAA LRO3 batteries. If the batteries are well fixed,
there are frequency light and speed light will be on. Pls be noted that we supply no battery for the
remote
.
1)
. Frequency connection: Press frequency button 2-4 seconds. Power on the car while low speed light flickers. It
connects automatically when you see the low speed light keep on. If the light still flickers, take out the battery and restart
it again as above steps.
2)
. Braking Button: press the braking button, the car stops. Press it again, braking function is relieved.
3)
. Speed button: Press S button to change speed. Press 1 time means speed changing 1 time. 3 lights on the remote
means 3 speeds, upper light means high speed, middle light means middle, and the down button is for low speed Notes:
Speed shift for forward only.
4)
Forward/reverse button: It’s to control the car to move forward and reverse. Press 1 button, the car will move as
ordered, and the speed will get higher gradually to set speed to avoid sudden shock from speed-up.
5)
Turning right/left button: It’s for remote the car to turn to right or left.
Special note:
The remote has energy-saving function. 10 seconds set-aside will make it power off itself, and all lights
will be off. Press any button then will make it wake up back to work.
