4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the bottom of the unit, use a
screwdriver to loosen the screw and open the battery box.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
610600 manual.indd 4
03/02/2020 11:43:49