Easi-Speak
™
Sound Station User Guide
Easi-Speak
™
Sound Station User Guide
Easi-Speak
™
Sound Station User Guide
Easi-Speak
™
Sound Station User Guide
6
8
7
9
• A complete charge of a fully discharged battery will
take about 24 hours. The Sound Station is intended to
be permanently left on charge so that it is always
ready for use.
Technical specification
• Built-in 1300mAH NiMH battery
• Total Harmonic DisNoise 0.3% (Typ)
• Six stereo 3.5 mm headphone sockets (green)
• One stereo 3.5 mm line-in socket (pink),
100mV RMS Max
• Battery life approx. 3 hours (depends on volume
setting and type of audio)
Troubleshooting
Sound Station is designed to work reliably and
predictably in all normal conditions. However, it is
possible that problems may occur. Please check the
following before contacting technical support:
Support & Warranty
This product is provided with a one-year warranty for
problems found during normal usage. Mistreating the
Sound Station or opening the unit will invalidate this
warranty. Any data stored on the Easi-Speak
™
and any
consequential loss is not covered by this warranty. The
battery is not user replaceable.
All out-of-warranty repairs will be subject to a
replacement fee.
Please visit
www.LearningResources.com
for the latest
product information and technical support.
Easi-Speak
™
is a registered trademark of TTS Group Ltd.
Problem Power LED appears dim
Solution Battery is low. Charge the battery. Sound
Station can be used while charging
Problem Power LED doesn’t come on
Solution Battery completely flat; recharge
Problem Sound is too quiet
Solution The Easi-Speak
™
recording is very quiet.
Increase the Easi-Speak
™
volume setting
before docking
Problem Sound is distorted
Solution Reduce the Sound Station volume until the
sound is free from distortion.
© Learning Resources, Inc., Vernon Hills, IL (U.S.A.)
Please retain our address for future reference.
Made in China.
LRM4403-GUD
Fabriqué en Chine. Informations à conserver.
Made in China.
Bitte bewahren Sie unsere
Adresse für spätere
Nachfragen auf.
Hecho en China.
Conservar estos datos.
Visit our website to write a product review
or to find a store near you.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
