How to Use Kitchen Machine
•
Before assembling make sure the power cord is unplugged from the power outlet and the speed
control knob is in the “0” position.
•
Press the “TILT” knob and swing the mixer head up.
•
Place the mixing bowl on the base so that it is sitting evenly. To fully lock the mixing bowl onto the
base, turn the bowl in a clockwise direction until the bowl clicks into position. To remove the
mixing bowl, turn the bowl from its locked position anti-clockwise until the bowl dislodged from the
base and can be lifted away.
Note:
Fitting or removing the mixing bowl must ensure the mixer head is locked into the tilt back
position and all the attachments are been ejected.
•
Place the mixing bowl cover by rotating it clockwise to lock into position after placing the mixing
bowl.
•
Insert the mixer attachments (wire whip or dough hook or beater) by fitting it into the off-center
and ensure the mixer attachments lock into position.
•
For optional accessories (blender, grinder, etc.), open the attachment hub cover and insert the
respective accessories into the hub until it lock into position.
•
Put the ingredients into the mixing bowl and slightly press the mixer head to lower the head until a
“click” sound is heard to secure it into position.
•
Plug the power cord into main power outlet and switches it ON.
•
Use the speed control knob to turn the mixer ON and control the mixing speeds. Turn the mixer to
“0” to an OFF position. Clearly marked instructions for correct mixing speed for each type of
mixture are shown in the “SPEED CONTROL GUIDE”.
•
Tip:
When kneading yeast dough, use speed 1 to achieve best results.
•
The mixer will stop operation once you have tilt up the mixer head during operation. Lower the
mixer head down to continue operate.
•
The mixer will also stop operation once the blender hub cover is open and no blender is inserted
into the hub as it has a safety switch inside.
•
Note
: The lid on the anti-splash guard is opened by lifting up the lid gently.
•
Note:
The mixing bowl cover is opened by lifting up as Illustration (a).
Illustration (a)
Warnings:
•
Unplug mixer before touching beaters or dough hooks.
•
Do not scrape bowl while mixer is operating.
•
The stand mixer may warm up during use. Under heavy loads with extended mixing time, you
may not be able to comfortably touch the top of the unit. This is normal.
2
