background image

3

Thank you for purchasing this Lec Medical product. Before you first use this

Ward refrigerator please carry out the following actions:

Check that the refrigerator has not been damaged in any way during transportation.

If any damage is found it must be reported to our customer services department
immediately on 0844-815-3755

Ensure all packaging has been removed, including cardboard, polystyrene and any
tape used to hold shelves in place for transportation.

The refrigerator has been cleaned prior to despatch; however, we advise that it should
be cleaned using lukewarm water containing a mild detergent and a soft cloth.

We recommend that the refrigerator should be left in an upright position for 24 hours
prior to switching on.

This appliance is intended for professional use in applications such as hospital wards
etc.

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Positioning and safely using your Lec Medical refrigerator

Make sure the appliance is placed in a dry, well ventilated site, away from heat
sources.

The appliance must be placed on a level surface. If necessary, adjust the feet on the
product so the appliance remains level during operation.

The appliance should have sufficient clearance around it to provide adequate
ventilation – 10cm at each side, 6cm at the rear and 2.5cm at the top.

Before ANY maintenance activity, pull the plug out of the socket by gripping the
plug, DO NOT pull on the plug cord.

DO NOT use double-wire extension cords. If an extension cord is necessary make
sure it is a cord, which possess a protection safety certificate.

If the main power supply cord is damaged, it should be replaced by a qualified service
engineer.

DO NOT attempt any repairs to the appliance yourself (apart from those highlighted
in the Maintenance and Service Section). Repairs carried out by someone without the
relevant training are putting their personal safety at risk and will invalidate your
warranty.

Do not store explosive substances such as aerosol cans with a flammable propellant in
this appliance

WARNING:

this appliance is only to be operated by authorised personnel or

personnel who have correct knowledge on how the appliance operates.

Transporting and moving your Lec Medical refrigerator

The refrigerator must always be moved in the vertical position. The cabinet must not be tilted
anymore than 40°. In the event that the cabinet is tilted more than 40°, the power supply must
not be connected until the appliance has stood upright for at least 24 hours.

Summary of Contents for WSR151

















Reviews: