The user will be responsible for the following items:
Suitability of the premises to the requirements of the purchased unit.
•
Electricity supply in accordance with the current standards and sufficient for the consumption
•
and safety of the unit.
Material necessary to clean the unit.
•
Water point or drainage outlet as necessary for the installation of the refrigerated unit.
•
The manufacturer disclaims all liability in the following situations:
Inappropriate use of the purchased unit.
•
Installation not carried out following the procedures described in this manual.
•
Defects in the electricity supply.
•
Unauthorised modifications or interventions.
•
Use of spares not specific to the model.
•
Total or partial non-compliance with the instructions.
•
•
Incidents caused by the transportation company or movement of the unit to its place of installa-
tion.
2. GUARANTEE
The guarantee for the unit and the parts that comprise it are guaranteed for one year starting from
the date of sale and consists of the replacement (carriage unpaid) of the defective component or
components, provided that it is not as a result of the misuse of the same.
The guarantee will not cover breakdown or breakage of components, even when the same occurs
within the established period, arising from subjecting the unit to working conditions other than those
established in this manual and the details of each model contained in the catalogue (failure in the
power supply, high ambient temperatures, windows, lighting, etc...).
3. INSTALLATION AND ASSEMBLY
The unit must not be moved from its standard vertical position, however as necessary, some applian-
ces may be placed face down only as indicated on the packaging.
You are advised to unpack the unit standing on a solid, flat and stable surface. In order to transfer
it to the installation location, a trolley or fork-lift may be of help. It should not be dragged along the
ground and always watch out to ensure it is not off-balance.
Next, remove the packaging to leave the unit completely free of all coverings and packing material,
whilst avoiding knocks to the appliance, scratching it or unscrewing the feet. Once it is levelled off,
the protective film should be removed from the stainless steel using a blunt implement.
Once placed in its final location, it should be pulled away from the wall so that there is a space of 7
cm at the back and a minimum of 7 cm to the sides.
F
IRST CLEANING
First remove the pre-cut protective film from the steel, using any blunt implement. The first cleaning
should be carried out using a cloth dampened in water and neutral soap.
DO NOT USE DETERGENTS
OR ABRASIVE PRODUCTS
, taking special care not to wet the electric components.
Totally avoid the use of utensils or elements that could scratch or damage the unit.
www.lec-commercial.co.uk
3
