Lec Club LE, User Manual

14

SECTION 4: CARE & MAINTENANCE

This helpful troubleshooting guide will provide you with information about how to recognize a 

problem with your product, determine possible causes, and find a solution. 
In the event your specific situation is not covered in this guide, please contact Living Earth Crafts 

so our technical support department can assist you. Beyond the troubleshooting guide below, do 

not attempt to repair the issue yourself. This can void your warranty. 
Unauthorized service will not be covered. Please be sure to contact Living Earth Crafts Customer 
Service first at (800) 358-8292, (760) 597-2155 Int’l.

Troubleshooting

Issue

Solution

No Power/Not 

Operating

1.  Ensure the power cord is properly plugged into an operational GFCI 

power supply/outlet.

2.  Check GFCI reset and circuit breakers or fuses.
3.  Ensure the outlet in your room is receiving power. This can be done 

by plugging in a small appliance and turning it on.

No Power to Jet/

Jet not 

Operating

1.  Ensure the power cord is properly plugged into an operational GFCI 

power supply/outlet.

2.  Check GFCI reset and circuit breakers or fuses.
3.  Ensure magnetic rotor/impeller is correctly installed in the case. 
4.  Reset the motors by unplugging the system, waiting 5 seconds, then 

plugging in again.

Excessive Noise 

from Jet

1.  Remove jet assembly and inspect for dirt buildup, debris, wear, or 

damage.

2.  Follow cleaning instructions or replace if necessary.

Water Leakage

1.  Check and ensure all visible bolts are tightened.
2.  Call a plumber to determine the source of the leak.
3.  If the leak is from the jet system, contact LEC customer service.