background image

11

GB/IE

Maintenance and Service

The sounds that can be heard during normal operation:

• clicks - heard when the control activates or deactivates the compressor

• buzz - the sound of the compressor intensely working shortly after its activation

• crackles and clatter - coming from the cooling system, caused by expansion and shrin

-

king of parts due to temperature differences before and after compressor activation

• rustle, gurgle, whistle - coming from the cooling system piping, caused by the co

-

olant flowing inside.

● Expanding and shrinking of parts caused by temperature changes causes crackling 

sounds that may be heard

Easily corrigible sources of noise:

● noise caused by the appliance positioned not level - adjust the position with the 

adjustable turn-in front feet. 

● rubbing the adjacent piece of furniture - move the refrigerator a bit.

● creaking of the drawers and shelves - take out and put back the drawer or shelf.

Problem

a break in the  opera-

tion of the freezer

the freezer compressor 

operates

continuously

Reason

A  gap  in  the  electric  system 

circuit

The  compressor  hardly  ever 

activates

The  ambient  temperature  is 

above +32°C

the freezer door is opened to 

often

Air circulation at the back of the 

appliance hampered

Solution

make  sure  there  is  electricity 

in  the  socket  by  plugging  in            

another electric device, such as 

a night lamp,

make sure the ambient tempera-

ture is not below +10°C

the  appliance  is  designed  for 

operation  in  temperatures  from 

+10°C to +32°C,

decrease  the  frequency  of        

opening the door

place the appliance according to 

the recommendations 

Summary of Contents for CU 357

















Reviews: