Lec TNF60186W, User Manual

3.  Take off the middle hinge by removing 

the screws. Lift the lower door and place 

it on a padded surface to prevent it from 

scratching.

  Remove the screws’ covers and place 

them to the opposite side.

  Swap the position of the plastic tube and 

hole cover on top of the lower door.

  Remove the door block, screw and plastic 

tube under the lower door and move 

them to the opposite side. You may 

need to replace the door block to fit the 

opposite side.

unscrew

Reversing the Door Swing

Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner

1.  Take off the hinge cover.

2.  Remove the the upper hinge. Lift the 

upper door and place it on a padded 

surface to prevent it from scratching.

  Remove the door block, screw and plastic 

tube under the upper door and move 

them to the opposite side. You may 

need to replace the door block to fit the 

opposite side.

•  Ensure the unit is unplugged and empty.

•  All parts removed must be saved to do the reinstallation of the door. 
•  Do not lay the unit flat as this may damage the coolant system.
•  We recommend that 2 people handle the unit during assembly.
•  If you want to have the door swing reversed, we recommend that you contact a 

qualified technician. You should only try to reverse the door yourself if you believe 

that you are qualified to do so.

8

INSTALLATION

LFC60W16_IB_160201_grace.indd   8

1/2/16   10:43 am