background image

 

User Instructions 

Before first use

 

Final checks before operating the appliance 

1.  Good air circulation around the appliance positioned. 

2.  The feet have been adjusted for perfect levelling. 

3.  Clean the compartment per recommendation in section “Care and Maintenance”. 

4.  Plug in the appliance. 

 

  The compressor starts up and in operation may produce some background noise and it is normal, 

this is not a defect. 

 

Using your appliance

 

1. Temperature adjustment 

 The compartment temperature can be set by the temperature knob between “Min” and “

Max

” (coldest 

setting).  We recommend setting the temperature knob midway first. 

 To ensure the compartment is maintained at the desired temperature, it is advised to monitor the 

temperature periodically by a thermometer and adjust the temperature knob accordingly. 

 Load the appliance after switch on for a while to allow the temperature reach the desired setting. 

 

2. Storing frozen food 

 The freezer compartment is 

 4 Star rated and suitable for the freezing and storage of pre 

frozen food. 

 Check the food packaging for 

 suggestion before storage. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for U6014S














Reviews: