p76 Leckey BeMe User Manual
SECTION 16.34:
ATTACHING AND
DETACHING PELVIC
CRADLE
Place the on the seat base cushion .
The pelvic cradle is labelled to indicate the
correct orientation. Attach the rear Velcro
strap up into the cavity within the thoracic
backrest cushion (moderate and complex
backrests).
Pass the black webbing though the cam
buckles at either side of the
front
of the seat,
, and secure the cam buckles. Pass the grey
webbing though the cam buckles at either
side of the back of the seat
E
, and secure the
cam buckles.
E
To attach the pelvic cradle to a basic backrest,
trim the rear Velcro strap to the level of the
top of the pelvic cradle. Secure as per ,
, &
E
.
Attach the buckle
F
, at the front to secure
the user.
F
Always attached the pelvic strap
first before making any other
adjustments.
Always secure the pelvic
harness or Pelvic Cradle first
before fastening other buckles
or harnesses. Adjust the harness
so the child cannot slide or
creep forward in the seat.
To detach the pelvic cradle, reverse the
process.
