Leckey Comfee Seat, User Instructions

To adjust the height of the Flipaway chest 
laterals, remove the covers and unscrew the 
2 bolts using your Leckey tool (a). Adjust the 
bracket to the required position and tighten 
bolts to secure. To adjust the width of the 
Flipaway laterals, insert your Leckey tool 
inside the slots at the rear of the backrest 
(b). Loosen the bolts on each lateral bracket, 
slide into required position and re-tighten to 
secure.

To Flipaway the laterals, pull and hold the 
knob until the lateral has flipped away.  
Release the knob to lock into position.

Be careful not to nip fingers when using 
the flipaway laterals

To adjust the pommel, move the calf support 
into the 90 deg position for ease of access.  
(The calf support can be adjusted to any 
position after the pommel is inserted). Locate 
the slot at the centre of the seat base, 
underneath it you will find a pull pin. Pull the 
pin down and slide the pommel into the slot 
(a). There are 3 depth options available and 
the pommel will click into the closest pre-set 
position when you release the pull pin.

9.7 Flipaway Chest 
Laterals

9.8 Pommel

A

B

A

Locate the lever at the rear of the wooden 
backrest at the top right (a). Pull to the right 
and tilt the seat to the required position.  
Release the lever to lock.

Locate the lever at the left hand side of the 
calf support (a). Pull the lever while adjusting 
the calf support to the required angle. 
Release the lever to lock.

9.9 Tilt in Space

9.10 Calf Support

A

A