Leckey Comfee Seat, User Instructions

To remove padded footplate straps, pull 
velcro strip away from the strap. To secure 
the padded footstrap around the user, pull 
the velcro strip tightly and secure to the 
strap.

10.8 Padded Footplate 
Straps

To Flipaway the laterals, pull and hold the 
knob (a) until the lateral has flipped away. 
Release the knob to lock into position.

10.9 Flipaway Laterals  

A

11 Cleaning & Care 
Information 

How to Maintain 

When cleaning we recommend that you 

use only warm water and a non-abrasive 

detergent. Never use organic solvents or dry 

cleaning fluids.

Upholstery and fabrics 

1. Clean and care for your fabric on a regular 

basis. Simply vacuum to remove dust 

particles and wipe with a damp cloth for 

general cleaning.

2. Microfibre cloths are extremely effective 

without soap which is helpful as soap can 

clog your fabric.

3. The cushion covers can be removed 

(except for the armrests, pommel and gables) 

and machine washed at 40°C. Line drying is 

recommended however they can be tumble 

dried at a low temperature. Please remove 

foam from the following covers before 

washing:

a.  Headrest (ensure you remove speakers 

before putting into washing machine if 

applicable)

b. Chest Laterals

c. Backrest Cushion

d. Seatbase Cushion

e. Padded Calf Support

All other soft upholstery can be placed into 

the washing machine intact, after removing 

bolts and fastenings.  Store these in a safe 

place and out of reach of children.

4. All fabrics including non-machine 

washable fabrics can also be cleaned 

by hand whilst in place.  When cleaning, 

we recommend you use a non-abrasive 

detergent.

5. Staining should be removed as quickly 

as possible with absorbent cloth, towels or 

a sponge. Routine soap and warm water 

sponging is effective for ordinary soiling and 

minor spills. Be careful not to over wet the 

fabric as this will cause the stain to spread.

6. Antiseptic cleaning agents can be used 

on more stubborn stains. These may require 

a safe solvent such as Isopropyl Alcohol or 

Mineral Spirit. Ensure that cleaning products 

are fully removed.

Metal and Plastic Components

1. Soap and water or antibacterial spray can 

be used for daily cleaning.

2. Do not use solvents to clean plastic or 

metal components.

3. Make sure the product is dry before use.

Wooden Components

Check all wooden components regularly to 

ensure there are no cracks or splinters.

1. Wipe clean with warm soaping water 

followed by a clean water rinse.  Do not 

use strong detergents, abrasive products, 

organic solvents or dry cleaning fluids.  

Heavily ingrained soiling may be removed by 

scrubbing with a soft brush.