Slide tray cover on from the rear and snap
the 2 poppers underneath the tray to secure
(a). Pull the tray cover across to the front
of the tray and secure using 2 poppers
underneath the front of the tray.
7.5 Attaching the Tray
Cover
Put the Comfee Seat into full recline and tilt,
the armrest in minimum width and maximum
height position and take off the lower
backrest cushion for ease of access. Lift the
gable arm on to the 2 x bolts underneath
the armrest (a). Attach the Leckey plate and
secure assembly with furniture connectors
(b). Screw bolt through metal plate into gable
(c) to secure at bottom. To secure the rear,
tilt the seat backwards; lift the armrest to
the highest position and screw bolt through
metal plate into gable (d).
7.6 Attaching the Gables
A
A
C
D
B
Move the calf support into the 90˚position
for ease of access. (The calf support can be
adjusted to any position after the pommel is
inserted). Locate the slot at the centre of the
seat base, underneath it you will find a pull
pin. Pull the pin down and slide the pommel
into the slot (a). There are 3 depth options
available and the pommel will click into the
closest pre-set position when you release the
pull pin.
7.7 Attaching the Pommel
A
Summary of Contents for Comfee Seat
Page 1: ...User Instructions Comfee Seat...
Page 24: ......
