p10
Mygo Seat - Size 3 Stander User Manual
SECTION 09:
HOW TO UNPACK
AND ASSEMBLE
Check parts
Congratulations on purchasing your
Mygo Seat - Size 3. All of the parts will
be contained in polythene bags with
each one clearly labelled. Carefully
remove them from the boxes and
check all the parts you have ordered.
Safety First
Keep polythene bags away
from children.
Some of the accessories will need
to be assembled before you attach
the seat to the base you have
purchased. If you are fitting the seat
to a mobility base please ensure you
fit the interface plate to the mobility
base first. Instructions on how to
attach the interface to specific bases
will be provided with the interface
plate. Once you have checked all the
components you are then ready to
assemble the Mygo Seat - Size 3 and
attach it to its base.
The backrest will be folded down for
shipping. Raise it into the vertical
position and, while doing so, slide
the inner tube into the receiving
outer tube. Secure the backrest in
an upright position and tighten the
socket cap. Check that it is secure
and does not move when pressure is
applied. If the user thrusts forward or
backwards they could cause injury to
themselves or their carers.
9.1 SETTING THE
BACKREST
• Dependant on 3rd party life-
sustaining apparatus such as
oxygen tanks
• Significant learning disabilities
and/or behavioural issues.
Contraindications
There are no contraindications
associated with the Leckey Seating
product family.
All precautions and contraindications
are taken at the discretion of
the prescribing clinician. Leckey
recommends a trained and
experienced clinician to be present
during the initial assessment, set up,
configurations and re-issues in order
to minimise risk.
