Mygo Seat - Size 3 Stander User Manual
p15
9.8 INSERTING
ATTACHMENT BOLTS
ON SANDALS
Insert the required attachment bolt
along with the retention plate
Place a rubber lid on both the top
and bottom of the sandal. Fasten
using the four screws
provided. To
remove or replace the attachment
bolt, reverse this process.
9.9 ATTACHING THE
SANDALS
Place the sandal so that the
attachment bolt goes through the
slot in the footplate. To secure, on
the underside of the footpate place
the rubber washer , followed by
the metal washer
and then the
knob onto the attachment bolt.
To position the sandals simply loosen
the knob under the footplate,
select the position you require and
re-fasten the knob.
