p22
Mygo Seat - Size 3 Stander User Manual
10.2 FLEXIBLE SACRAL
CUSHION
The flexible sacral cushion can be
attached by sliding it over the plastic
tongue, using the fixing snap fastener
to secure in place.
B
A
10.3 PELVIC HARNESS
The Pelvic Harness is attached by
sliding the hip guides into the
pockets on the outer face of the
harness. It is adjusted to the desired
position by securing it to one of the
snap fasteners on the adjustable
hip guide bracket. The buckle on
the tie down strap is clipped into a
receiving buckle on either side
of the seat base. Finally secure the
pelvic harness by attaching the centre
plastic buckle
.
10.4 PELVIC CRADLE
Fasten the Pelvic Cradle and place on
the seat base cushion. It is labelled to
indicate the correct orientation. Press
Velcro onto the seat base cushion
and attach four buckles to secure.
There are two buckles at the back of
the seat and one on either side.
