Mygo Seat - Size 3 Stander User Manual
p31
11.8 ADJUSTING THE
UPPER LEG SUPPORTS
The upper leg supports will be set at
the minimum position on arrival. Set
the depth before placing the child in
the seat. Fine adjustment is possible
afterwards but is restricted by the
user’s weight. To achieve the correct
position measure the length from the
child’s lower back to the back of their
knee.
Loosen the locking levers
under
the seat and slide leg support
to required position. Keep the
supports pointing straight forward
The backrest must be in
the upright position with
the dynamic function
locked off (i.e. the handle
to the lowest position on
the backrest supine) and
ensure the locking pin is
engaged when the seating
system is used in transport.
The range of the backrest angle and
the range of dynamic movement are
a maximum of 30°, i.e. if the backrest
is upright, a full 30° is available on the
dynamic system. If the backrest angle
is at 10° then only 20° of movement is
available with the dynamic backrest
and so on.
