p32
Mygo Seat - Size 3 Stander User Manual
11.9 UPPER LEG GUIDE
LATERAL SUPPORTS
To adjust the width or angle on the
lateral supports, loosen the bolts
from above, move the guides and
retighten the bolts.
11.10 FOOTPLATE
HEIGHT
To set the height of the footplate
loosen the bolt
on the front of
the calf support tube and slide the
footplate to the required height and
retighten the bolt.
To set the correct height of the
footplate measure the distance from
the back of the child’s knee to the
bottom of their heel.
You may have to adjust the angle to
achieve the required foot position. To
adjust the angle loosen the bolt
with the multi-tool, set to the desired
angle and retighten. There is a safety
popper to indicate maximum safe
extension. This can be set with the
child in the seat.
at this time unless wind sweeping
or adduction, abduction must be
accommodated, in which case set the
angle accordingly. Retighten bolt. To
increase the angle further, remove
bolt and move leg angle to wider
setting. Insert bolt into second slot
and tighten.
