p42
Mygo Seat - Size 3 Stander User Manual
c
For safety, the height adjustment
pedal on the chassis can be locked by
engaging the pull pin
on the right
hand side of the pedal. To unlock, pull
the pin out and rotate 90 degrees,
the pedal can then be operated. The
locking pin (C) should be kept in the
locked position when you are not
adjusting the chassis.
Always keep the locking
pin engaged when you are
not adjusting the chassis.
This will prevent the foot
pedal being operated
accidentally.
For children over the
weight of 27kg (60lbs),
raising the manual
chassis is a 2 person lift
(UK lifting and handling
regulations).
Always use caution as
hands could become
trapped when height
adjusting the base.
12.6 TILT IN SPACE
The tilt-in-space can be angled
while the user is in the seat. Before
you adjust the tilt-in-space angle of
the seat, always ensure the pelvic
harness is secured preventing the
user from sliding forward in the seat.
To adjust the tilt angle press the
lever under the seat base. Once you
have selected the angle you require,
by simply removing your hand from
the lever, the chair will be locked in
position. The tilt-in-space should be
locked off while the user is in the seat.
To lock the lever twist the pull pin to
the right hand side of the lever and
the pin will pop into position. You may
have to lift the lever slightly to allow it
to lock. To unlock pull the pin out and
rotate 90 degrees, the lever can then
be operated.
