Mygo Seat - Size 3 Stander User Manual
p45
12.10 TRAY
ADJUSTMENT
The activity tray can be used for a
range of functions and its position
can be fine tuned to suit the user
and the activity whether it is for
fun, education or feeding. The tray
is attached to the seat by inserting
the tray tubes through the centre of
the armrest. Once the tray is located
in the position the knob should
be tightened securely. Adjust the
armrests to set the height and angle
of the tray.
To adjust the height of
the armrest, loosen the
hand knob , set to
the desired height and
retighten. To adjust the angle,
rotate hand knob until
the desired position has been
achieved.
To remove the armrest
completely for side transfer or
assist in getting the child into or
out of the seat loosen hand knob
, press popper and lift the
armrest.
Always use caution as fingers
could become trapped in the slot
when adjusting the height.
Always use caution to ensure
the child’s hands or arms do not
become trapped when inserting
the tray.
Never use the tray to steer or
push the chair.
Do not place hot objects, greater
than 40 degrees Celsius on the
tray.
Please note that the tray is for
the use of the user only. Do not
lean or place heavy objects on
the tray, not greater than 8kgs
(17.6lbs).
