Mygo Max User Manual
p21
The hip laterals can be width and angle
adjusted to suit the user’s requirements.
Loosen the screws
A
at the back of the
sacral support. Move the hip laterals
to required position. Ideally the hip
laterals should always be rotated so
they rest on top of the seat cushion
even if the backrest or sacral support
is angled. Once the hip laterals are in
position, retighten the screws securely.
The laterals can also be angled to
help support, abduction adduction or
windsweeping.
11.2 HIP LATERAL
To adjust the angle of the hip laterals
loosen the screw
B
on the hinge of
the hip lateral. Adjust to the required
angle and retighten the screw. The pads
can also be adjusted in depth and a
small degree of rotation by loosening
the screws
C
on the pad, sliding it to
the required position and retighten the
screws.
To adjust the overall height of the
backrest loosen the two screws in the
middle of the backrest, adjust to the
required position and retighten securely.
The height can be fine tuned with the
user in the seat.
11.3 BACKREST HEIGHT
A
C
D
B
B
C
