Mygo Max User Manual
p22
The upper leg supports will be set at the
minimum position on arrival. Set the
depth before placing the child in the seat.
Fine adjustment is possible afterwards
but is restricted by the user’s weight. To
achieve the correct position measure the
length from the child’s lower back to the
back of their knee.
Adjust the supports to the desired
position using the two knobs underneath
the seat base. To adjust, loosen the
knobs, slide to the desired position and
retighten. Keep the supports pointing
straight forward at this time unless wind
sweeping or adduction, abduction must
be accommodated, in which case set the
angle accordingly using the knobs again.
To change the angle loosen the screw at
the bottom of the backrest spine, adjust
to the required position and retighten the
screw securely.
The backrest angle can be adjusted with
the user in the seat. The backrest spine
has a useful angle indicator designed to
indicate the preferred position or back
angle for different activities.
11.5 ADJUSTING THE
UPPER LEG SUPPORTS
11.4 BACKREST ANGLE
Use caution when adjusting
to minimum setting as
fingers could become trapped
between moving and static
parts.
Hold the backrest spine with
one hand while you adjust the
back angle.
