Mygo Max User Manual
p25
Standard Sacral Support
To adjust the height, depth or angle
of the standard sacral support, loosen
the two screws
A
on either side of the
bracket, move to the required position
and retighten the screws.
Ball & Socket Sacral Support
To adjust the height or depth of the
ball & socket sacral support, loosen
each screw
A
on either side of the
bracket, move to the required position
and retighten the screws. To adjust the
angle, loosen both the screws
B
on the
ball and socket joint. Position the support
at the required angle and retighten the
screws.
11.11 ADJUSTING THE
SACRAL SUPPORT
Standard laterals
Loosen the bolts
A
to adjust the width,
height and angle of the lateral supports
and retighten when you have achieved
the desired position.
Flipaway laterals
Adjust width, height and angle as above.
The laterals can be flipaway by pulling
pin
B
.
11.12 LATERAL SUPPORTS
A
B
A
B
A
