Mygo Max User Manual
p38
SECTION 16: RE-ISSUING
LECKEY PRODUCTS
Most Leckey products are assessed
and ordered to meet the needs of
an individual user. Before reissuing
a product we recommend that the
therapist prescribing the product has
carried out an equipment compatibility
check for the new user and has ensured
that the product being re-issued contains
no modifications or special attachments.
A detailed technical inspection should
be carried out on the product prior to
re-issuing. This should be carried out by
a technically competent person who has
been trained in the use and inspection of
the product. Please refer to section 15 for
the required checks to be carried out.
Before re-issuing a product, it is
recommended that it is disinfected using
one of the following procedures:
Note: Always clean the product first
to remove accumulated soiling prior to
disinfecting/sanitising.
1. Where possible, we recommend
the use of an automated “fogger”
disinfection system that is used
to completely cover the product
surfaces with a disinfectant agent.
The manufacturer’s instructions for
the chosen system should be referred
to prior to use and followed exactly.
2. Where an automated disinfection
system is not available, all product
surfaces should be wiped over
with disinfectant surface wipes or
liquid disinfectant on a soft cloth.
Suitable products are 70% IPA,
70% Alcohol or diluted bleach. The
manufacturer’s instructions for the
chosen product should be followed.
Product upholstery and fabrics
should be cleaned thoroughly in
accordance with section, Cleaning
and Care Information, of this manual.
Ensure a copy of the user manual is
supplied with the product. A copy can be
downloaded from our website
www.leckey.com
Leckey recommend that a written record
is maintained of all product inspections
carried out during the reissue of the
product.
