p14
Leckey Mygo+ User Manual
SECTION 7.6:
ATTACHING THE
SHOULDER SECTION
To attach the shoulder section to a
Size 1 Mygo+, remove the headrest
mounting bracket by removing the bolts
A
. Insert the shoulder section bracket
and supplied spacer plate between the
backrest and the headrest mounting
bracket. Bolt back together. Secure the
two metal tabs with additional screws
B
provided with the new spacer plate.
The screws are attached from the front.
Check it is securely fastened.
SECTION 7.7:
ATTACHING THE
LATERAL SUPPORTS
While holding the components together,
remove the plastic knob and washer
A
.
Align the plastic angle adjuster mouldings
and lateral bracket with the slot in
the backrest and refit the washer and
plastic knob.
A
A
B
B
A
