When your Splashy arrives,
the straps will look like the
diagram shown. To adjust the
straps to a smaller setting,
please follow these instructions.
Remove the highlighted section
of the strap from the foam.
Fold the thinner end of the foam
backwards and ensure that the
openings line up.
Feed the straps through the first
opening on the doubled over foam.
Once it has been pulled through
completely, feed up through the
second opening and pull to tighten.
Standard size
Shortened size
In some cases you may want to
reduce the size of the lateral and
shoulder supports to fit a smaller
child using Splashy.
Shortening harness straps
