Squiggles Stander - User Manual
p33
12.9 ADJUSTING
THE HEIGHT OF THE
SUSPENSION SYSTEM
If you purchase a larger set of wheels
for your mobile stander you will need
to adjust the height of the suspension
system. To adjust the height loosen and
remove the nut and bolt at the top of the
suspension upright, raise the stem to the
higher position, replace the bolt and nut
and tighten securely. Repeat the process
for the other wheel.
12.10 APPLYING THE
BRAKES
To lock the brakes on the mobile chassis
push the levers down on either side of
the chassis to unlock push the levers up.
12.11 PIVOT CHASSIS
ANGLE ADJUSTMENT
The angle can be adjusted whilst the
user is in the stander. You should ensure
the child is secured in the stander using
the thoracic and hip pads. To adjust
the angle of the stander first release
the locking pin. To release the pin, pull
and rotate plastic knob through 90
degrees into the locked position.
Press the lever down and set the
stander to the desired angle. Always
re-lock the locking pin .
Ensure that the product
and user are away from
surrounding furnishings to
prevent possible collision
when adjusting the angle of
the pivot chassis.
