12
TREADLE SEPARATOR
Affix the Treadle Separator Board on top of the back of the side base
and secure using 2 #8, 1¼” Round Head Screws.
TREADLE SET ASSEMBLY
Assemble the treadle
set (in or out of the loom)
as shown in picture
using:
1 treadle rod 27¾”
10 treadles
9 wood spacers
2 treadle blocks
2 x 9/16" washers
2 X push nuts 7/16”
(one is already on the rod)
Affix treadle set to the treadle
cross-member using:
2 carriage bolts ¼” x 3”
2 washers ¼” (under cross member)
2 Wing nuts ¼”
Treadle
Block
Place one washer between the last treadle and the treadle blocks.
