13
Slide jack box B along the middle posts A, from bottom to top, and affix it to
blocks C using eight 1½” (40 mm) round-headed screws no. 12.
NOTE: The 10 screws go in the front bottom of the loom.
The eyescrews go in the back bottom of the loom.
Install the heddles in the shaft
frames. (see “WARP AND
WEAVE” on page 10)
Remove the saran wrap on the
jack box.
Slide shaft frames T between
dividers Q.
The shaft frames must rest on
the plastic supports U of the
jacks
NOTE: Some shafts may be
tight between the castle frame
until the castle top is attached.
The Leclerc Logo goes
in the top front of the
shaft frame
The ratchet pawl Q affixed
to the Side Loom must be
lifted up while inserting
the Jack Box.
Q
