24
Cut the 5-yard (4.5 m) cord in half. One half of this cord
laces beam stick A to warp rod B
Insert a metal rod into the apron of the cloth beam. Use the
other half of the cord to lace this rod to the third metal rod.
Screw eyes have been affixed to the inner side of the
main post.
After having passed a string through the holes of the
lease sticks, tie the ends of this string to the thread
beam and to the screw eye. Do the same operation with
the other end of the lease sticks.
The lease sticks will then be held at a practical height
for threading
We at Leclerc encourage Weaver feedback
on this and all our products. Please
send your comments to Leclerc Loom Co.
info@leclerclooms.com
HAPPY WEAVING
(breast beam)
Warp beam
advance
control
system
This system will eliminate excessive warp
yarn advance when releasing the brake
system at cloth take-up. This friction system
is adjustable and have to be released when
winding the warp on.
Just screw the wing nut with nylon bolt to the
left back post. Screw in to increase the friction
or unscrew it to release.
