19
Depress the left treadle. Start the Software and the first pattern selection (Plain
Weave)
All the even or un-even solenoids have to extend fully as in this picture.
If one or a few solenoids are not fully extended, that means that the tension on that
Cable is too high.
If you want to confirm if it is a tension problem, try to extend the plunger fully by hand.
If you cannot then it may be something else.
If one or a few solenoids are extending slower than the others, this is another indica-
tion that the tension on those solenoids (cables) are too high.
It is very important that you repeat this step a number of times to see if there is a
problem.