8
Make sure the treadle cables are
installed properly and in the groove of
each pulley.
The Red and Green loop cords start
at the left treadle of the loom (stand-
ing in the front of the loom)
the Black and White loop cords start
at the right treadle and are opening
the shed.
For this loom to work
properly, the action of
the selecting arms must
operate as follows:
1) The arms have to open up to the guides(U)
2) The top arm has to follow the groove of the
guide board (G), following the inside groove on
the way up and the outside groove on the way
down.
3) The arms have to close completely.
The length of the loop cords have been tested
before shipping.
It is possible that after a while you will have to
shorten them especially if the treadles touch
the floor.
A1
A2
A1
A2
UU
