Digital Transmitter
Rio Rancho, NM
7
Powering On and Off
Powering On in Operating Mode
Press and hold the Power Button for a few seconds
until the progress bar on the LCD finishes.
When you release the button, the unit will be operational
with the RF output turned on and the Main Window dis-
played. You can also use the programming switch if it is
configured for this function.
Hold
for
Rf On
470.100
-40
-20
+0
DCHT
MUTE
Powering On in Standby Mode
A brief press of the power button , and releasing it
before the progress bar finishes, will turn the unit on
with the RF output turned off. In this Standby Mode the
menus can be browsed to make settings and adjust-
ments without the risk of interfering with other wireless
systems nearby.
Hold
for
Rf On
Release
Power Button
before the bar
progresses to
enter Standby
Mode
RF indicator blinks
470.100
-40
-20
+0
DCHT
NOTE: After settings and adjustments are made,
press the power button again to turn the unit off
or navigate to menu item Xmit, RFOn? to choose
to begin transmitting.
Powering Off
Powering
Off...
To turn the unit off, press and hold
hold the Power Button for a few
seconds and wait for the progress bar
to finish, or use the programmable
switch (if it is configured for this
function).
If the power button is released, or
the top panel switch is turned back on again before the
progress bar finishes, the unit will remain turned on and
the LCD will return to the same screen or menu that was
displayed previously.
NOTE: If the programmable switch is in the OFF
position, power can still be turned on with the
power button.
Main Menu and Setup
Screen Details
Entering the Main Menu
The LCD and keypad interface makes it easy to browse
the menus and make the selections for the setup you
need. When the unit is powered up in either the operating
or the standby mode, press
MENU/SEL
on the keypad
to enter a menu structure on the LCD. Use the and
arrow buttons to select the menu item. Then press the
MENU/SEL
button to enter the setup screen.
-40
-20
0
Gain
25
The prompt in the upper right corner may
display one or both arrows, depending upon
what adjustment can be made. If the changes
are locked, a small padlock symbol will appear.
Input...
Gain
Rolloff
StMode
Main Window Indicators
The Main Window displays the current settings, status,
audio level and battery status.
470.100
-40
-20
+0
DCHT
MUTE
Frequency (MHz)
Operating
mode
(Transmit or
Standby)
Battery status
Audio level
Programmable
Switch Function
If the programmable switch function is set for
MUTE
, the
Main Window will indicate that the function is enabled.
470.100
-40
-20
+0
DCHT
MUTE
Mute function
enabled but
not active
When the switch is turned on, the mute icon appearance
will change and the word MUTE will blink at the bottom
of the display. The -10 LED on the top panel will also
glow solid red.
470.100
DCHT
MUTE
<–MUTE–>
Main Window will
blink the word
MUTE when the
audio is muted
Mute function
enabled and active
