background image

    

LECTROSONICS, INC.

6

System Setup Procedures

Summary of Steps

1) Install receiver batteries and select the battery type in the setup screen 

or connect power.

2) Select frequency step size in the receiver.
3) Select the compatibility mode in the receiver.
4) Find a clear operating frequency (two methods).
5) Set up transmitter to matching frequency and compatibility mode.
6) Adjust transmitter input gain.
7) Adjust receiver audio output level to match recorder, camera, mixer, etc.

1) Install Receiver Batteries

Install the batteries according to the polarity marked on the back of the hous-

ing and select the correct battery type in the menu. Check the BATT LED on 

the control panel to verify adequate power is present - the LED should glow 

green. Select the type of batteries being used in the 

RX Battery setup screen.

2) Select Frequency Step Size

Navigate to 

Step Size in the LCD menu and select 100 kHz or 25 kHz as 

needed to match the associated transmitter.

3) Select Receiver Compatibility Mode

Navigate to 

Compat.Mode on the menu and press MENU/SEL to enter the 

setup screen. The optional modes will appear one at a time. Use the UP and 

DOWN arrow buttons to scroll through the list. When the desired mode ap-

pears in the screen, press MENU/SEL or BACK to select the mode and return 

to the previous menu. Press BACK to return to the Main Window.
  Transmitter Models 

LCD menu item

US Digital Hybrid 

Wireless

®

NA Dig. Hybrid

Mode 3*

Mode 3

200 Series

200 Series

100 Series

100 Series

Euro Digital Hy-

brid Wireless®

EU Dig. Hybrid

300 Series:

300 Series

Mode 7*

Mode 7

Mode 6*

Mode 6

IFB Series

IFB

NA Dig. Hybrid is the best mode to use when both transmitter and receiver 

are Digital Hybrid Wireless models. This compandor-free, wide deviation 

mode produces the best audio quality.

Summary of Contents for L series













Reviews: