LVS5066 User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
12
11
）
Preview multi pictures display model( Preview ?, OK)
LVS5066 not only can show the current chosen input signal of the
six channels, also its preview output can support 7 kinds multi pictures
display. These displays are from CH1-CH4 which can be realized by
connecting DVI to CH5 or CH6, then to LED screen by pressing cut
button. The operation method is as follow:
Press “Preview?” button in succession to cut display modes.
Then press “Preview ok” to make the chosen mode become effective.
Multi pictures modes
showing
contents
showing instruction
PM60:2X3=6 Pictures
CH1~CH6
6 picture preview
PM40:2X2=LU+RU+LD+RD CH1~CH4
2x2 mode four pictures
display of 4channels
PM34:3X1= U+M+D
CH1~CH3
three pictures display of up,
middle and down
PM33:1X3=L+RU+RD CH3=L
CH1~CH3
PM32:1X3= L+RU+RD CH2=L
CH1~CH3
PM31:1X3= L+RU+RD CH1=L
CH1~CH3
Three pictures display of one
main picture and two pictures
on the up and down of the right
side.
PM30:1X3= L+M+R
CH1~CH3
Three pictures display of left,
middle and right.
PM21:2X1= U+D
CH1
、
CH2
Two pictures display of up and
down.
PM20:2X1= L+R
CH1
、
CH2
Two pictures display of left and
right.
IV. Setup
The following setup must be made by relevant qualified
technicians. For ordinary users, unless they have received adequate
relevant training, they shall not attempt the following setup
operations!
There are 33 items in 5 categories available for you to set in
LVS5066
.
Technicians can set these items as necessary, for details see the table
below:
