www.prolight.co.uk
PRO Starcloth Systems
User Manual
5
Operating instructions
Colour macro mode
To access colour macro mode press the
“UP/DOWN”
buttons to show
“MACRO”
on the LCD display.
It will now run through its built-in programmes in either of the selected sound or auto modes.
Press the
“ENTER”
button to adjust the colour macro steps from 1-62 using the
“UP/DOWN”
buttons.
Press the
“ENTER”
button to save your setting.
Static colour mode
To choose from any of the 7 static colours press the
“UP/DOWN”
buttons to scroll through from
“BLACK MASTER”
to
“WHITE MASTER”
on the LCD display. To change the settings on any of the
chosen colour press the “ENTER” button twice and use the
“UP/DOWN”
buttons to adjust any of the
“brightness”
,
“dimming mode”
,
“colour adjust”
and
“strobe”
.
Please note that all settings are from 000-255 (000 = off, 255 = full on).
Press the
“ENTER”
button to save your setting.
Built in programmes
To access any of the 10 built-in programmes press the
“UP/DOWN”
buttons to scroll through from
“PROGRAMME 1”
to
“PROGRAMME 10”
on the LCD display. To adjust the dimming, speed or strobe
of the chosen programme press the
“ENTER”
button twice and use the
“UP/DOWN”
buttons to scroll
through the options and press the
“ENTER”
button to enter each option. Now use the
“UP/DOWN”
buttons to adjust the values from 000 - 255.
Press the
“ENTER”
button to save your setting.
DMX mode:
To access the DMX mode press the
“UP/DOWN”
buttons to show
“ADDR:001”
on the LCD display.
To set the DMX address press the
“ENTER”
button twice to show
“DMX ADDRESS”
on the LCD display
and press the
“ENTER”
button and use the
“UP/DOWN”
buttons to set the address from 001 - 512.
Now press the
“ENTER”
button to save your setting.
In DMX mode there are break options so you can set up how the fixture will operate if the DMX signal
breaks. To set this up while you are in the DMX mode press the
“ENTER”
button twice to access the DMX
menu and use the
“UP/DOWN”
buttons to show
“DMX BREAK”
on the LCD display. Press the
“ENTER”
button and use the
“UP/DOWN”
buttons scroll through the options and press
“ENTER”
to save your
setting.
Stop Run
- Will stop the cloth running the current program and stay static when the DMX signal breaks.
Hold Run
- Will continue to run the current program when the DMX signal breaks.
Auto Run
- Will switch to auto run automatically and run the built-in programmes randomly.
Sound Run
- Will switch to sound activation automatically and run the built-in programmes randomly.
To select one of the 7 or 28 DMX channel modes use the
“UP/DOWN”
buttons to show
“CHANNEL SELECT”
on the LCD display and use the
“UP/DOWN”
buttons to scroll through the two
DMX channel options. Press the
“ENTER”
button to save your setting.
